Acrylic nails are durable, protect the natural nails from breaking and just look beautiful. In addition, they are currently among the hippest nail designs, and are also very popular with the celebrities. However, the acrylic technique is not easy to learn – you need a lot of practice and should be very, very careful not to damage the natural nails thereby. In this article we will show you step by step how to make the modern acrylic nails yourself. Below you will find our detailed instructions for advanced users, as well as many helpful tips (it would be an advantage, for example, if you already master the gel” technique> ). We hope that the hints are of help to you and wish you good luck!
Make acrylic nails yourself – necessary materials and helpful tips
Making acrylic nails yourself is not an easy task, but with the practice you would always get better results. Acrylic modeling involves two components – acrylic powder and liquid liquid kit, which are mixed on the brush and applied to the surface of the nail. The modal mass hardens faster or slower in the air – depending on the liquid you use. You will also need the following materials: a ProPusher (to remove the cuticle), a soft cloth (to brush off the brush), a file, disinfectant, a dust brush, and a small flask (Dappen Dish) for the Liquid. It is important that the acrylic powder and the liquid of the same brand, so you get an optimal result. You need a clear and a tinted acrylic powder (for the nail bed), as well as one or two colors for the French lace. Particularly modern and effective are the acrylic powders with a slight sheen. The brush also plays a very important role – it should consist of natural hair if possible, have a pointed shape and the size 6 or 8. Today you can find special sets for acrylic nails in the larger drugstores, where everything you need is available. Read on to find out how to make the acrylic nails yourself!
Make acrylic nails yourself: detailed instructions
First, of course, you should prepare your natural nails accordingly. Disinfect your hands and remove the cuticles with the ProPusher. Then file the nails into the desired shape and remove the dust with a soft brush (the shape and length of the nails are a matter of taste, with a little more experience you could use the acrylic technique even for very short nails). Fill a small container with a little liquid and open the desired powder. If you want to lengthen your nails – with templates or tips, this should be the next step. Either the templates are carefully applied to the surface of the nail, or the tips glued on, and if necessary – shortened and filed. Then a primer is applied to the nails, which dries out in the air. Now dip the brush in the liquid until it is soaked, but not dripping wet. Carefully pick up some powder with the brush tip to make a small ball, set it down on the middle of the nail, and gently press the brush in the desired places – the goal is to evenly distribute the powder on the nail surface. For nail modeling you have several options: You could opt for a clear background layer, and then put a French tip with gel or colored acrylic powder, or extend the nail bed with a tinted powder, and then make the French tip. Finally, a make coat is applied. To polish your manicure, you could polish it with a strong file and remove the dust with the brush again. Much faster, however, it is possible to apply a sealing gel on the nails, and let this harden under UV light. Finally, apply a little nail oil to the cuticle and massage it in. Finished!